基于FAHP的机械振动WSN均衡拓扑构建方法

针对机械振动无线传感器网络因拓扑不均衡导致传输时延和网络传输能耗增加的问题,提出了一种基于模糊层次分析(fuzzy analytic hierarchy process,简称FAHP)的均衡拓扑构建方法,该方法由构建模糊判断矩阵和计算权重向量组成。首先,传感器节点进行簇内通信获取信标广播信息,将信标节点网络决策因子统一量纲化,利用网络决策因子构建模糊判断矩阵;其次,检验模糊判断矩阵一致性,采用行和归一化处理或拉格朗日最小二乘法计算权重向量;最后,传感器节点通过权重向量计算出各个信标节点综合权值,关联最优信标节点为父节点加入网络,将提出的模糊层次分析拓扑构建方法与基于链路质量单准则构建网络拓扑机制进行对比。实验结果表明,该方法能有效改善传输时延和机械振动无线传感器节点网络寿命。     

基于Flow-3D的高速水流无压溢洪洞内消能工数值模拟

针对目前高速水流消能形式存在的缺点,基于Flow-3D软件,采用RNGκ-ε模型、Tru-VOF法模拟了无压洞式溢洪道内消能墩附近的水流运动特性,结合洞塞式消能工的消能机理和水工模型试验,对比分析了内消能墩附近的水流流态、流速分布、压强分布、水面线和消能率等。结果表明,在控制断面束窄度的条件下,消能墩附近流态不会影响洞内安全,消能效果较好,消能墩对墩后水流影响距离较短,为在洞内设置多组消能墩提供了依据。研究成果可为类似工程提供参考。     

基于双面组件的可调支架光伏发电系统仿真研究

以双面光伏组件和可调支架系统为基础,以青海格尔木为模拟地点,利用PVsyst光伏仿真软件,分析了不同调节次数的可调支架系统与固定支架系统在组件正面和背面辐射量、系统发电量、系统收益的差异。研究结果表明：通过调节支架改变光伏组件的角度后,组件最低点离地高度也在变化,直接影响组件正面和背面的辐射接收;光伏方阵前后间距影响土地利用率（GCR）,土地利用率降低后,背面的辐射量和系统发电量都有一定的增加;相对于固定支架双面发电系统,可调支架双面系统在不同调节次数下的组件背面全年辐射量均有一定降低,但整体的发电量得益于正面辐射的增益,最高可达4.8%左右;技术和经济比较结果显示,双面组件采用可调支架系统,每年2次的调节方式,25年生命周期内系统收益最高。文章还分析了单面发电组件和双面组件系统使用可调支架的经济性对比,在相同的调节次数下,双面组件系统的增益明显高于单面组件系统。本文的研究成果对可调支架双面组件发电系统的设计具指导作用。     

潮流能水平轴水轮机在剪切来流下的水动力分析

采用基于计算流体力学方法的全尺度数值模拟计算,建立了适用于潮流能水轮机模拟的剪切来流环境,通过数值计算结果,对潮流能水轮机随时间变化的宏观力和流场特征进行了系统分析,探索水轮机在复杂工况下的水动力特性规律。结果表明,水轮机整个叶轮的总体平均受力在剪切流工况中未受到明显影响; 单个叶片的瞬态轴向力系数和瞬态轴向扭矩系数在旋转周期内出现了明显的周期性变化,且周期性变化幅值随转速增大而增大; 非定常的瞬时轴向扭矩和力的周期性振荡容易引起单个叶片的结构性振动,可能对水轮机的机械结构造成影响。     

Effects of W6+ substitution on crystal structure and microwave dielectric properties of Li3Mg2NbO6 ceramics

Li₃Mg₂(Nb_1-xW_x)O_6+x/2 (0 ≤ x ≤ 0.08) ceramics were synthesized by the solid-state reaction route. The effects of W⁶⁺ substitution on the phase composition, microstructure and microwave dielectric properties of Li₃Mg₂NbO₆ ceramics were investigated systematically. The XRD results showed that all the samples formed a pure solid solution in the whole doping range. The SEM iamges and relative density revealed the dense structure of Li₃Mg₂(Nb_1-xW_x)O_6+x/2 ceramics. The relationship between the crystal structure and dielectric properties of Li₃Mg₂(Nb_1-xW_x)O_6+x/2 ceramics was researched through polarizability, average bond valence, and bond energy. The substitution of W⁶⁺ for Nb⁵⁺ in Li₃Mg₂(Nb_1-xW_x)O_6+x/2 ceramics significantly promoted the Q × f values. In addition, the increase of W⁶⁺ content improved the thermal stability of the Li₃Mg₂(Nb_1-xW_x)O_6+x/2 ceramics. The Li₃Mg₂(Nb_0.94W_0.06)O_6.03 ceramics sintered at 1175 °C for 6h possessed excellent properties: ε_r ~ 15.82, Q × f ~ 124,187 GHz, τ_f ~ −18.28 ppm/°C.     

The potential and economic viability of hydrogen production from the use of hydroelectric and wind farms surplus energy in Brazil: A national and pioneering analysis

Energy security is an issue at stake in governments all over the world, and also in Brazil. Although the country's energetic matrix is largely based on hydropower sources, the need for diversification is increasingly needed. The possibility of hybrids between hydropower and wind power for hydrogen production emerges as a clean alternative source for energy security. In high-throughput seasons, excess energy could be used to produce hydrogen, which could supply shortages of energy. This study shows the potential for producing hydrogen in Brazil, using excess energy from hydroelectric and wind farms. Taking into account one hour per day of surplus energy production, it would be possible to generate 6.50E+09 Nm³.y⁻¹ of H₂. On the other hand, considering two and three hours, the H₂ generation would be equal to 1.30E+10 Nm³.y⁻¹ and 2.00E+10 Nm³.y⁻¹, respectively. This study calculated the economic viability for hydrogen production, at a cost of 0.303 USD.kWh⁻¹, a higher cost if compared to that of the wind and hydroelectric plants.     

First principles computational studies of spontaneous reduction reaction of Eu(III) in eutectic LiCl‐KCl molten salt

Using first principles calculations, we study fundamental mechanism of spontaneous reduction reaction of Eu³⁺ to Eu²⁺ in eutectic LiCl‐KCl molten salt. We decouple the reaction Gibbs free energy into enthalpy and entropy contributions by using rigorous thermodynamic formalism. Key structural features of the solvation shell are characterized by the radial distribution function and the coordination number. Compared with Eu²⁺, the Eu³⁺ ion has a more rigid framework of the solvation shells, corroborating its stronger electrostatic interaction with neighboring ligands of Cl^? ions and a more favorable state on the aspect of enthalpy. Computations on vibrational frequency, however, pose significant contribution of vibrational entropy to the reaction Gibbs free energy for the reduction. Vibration frequency of Eu²⁺ is smaller than that of Eu³⁺, driving a more positive change of the entropy in the reduction reaction. Furthermore, an Eu²⁺ diffuses more quickly than an Eu³⁺ in the LiCl‐KCl molten salt with switching mechanism of ligand Cl^? ions in the solvation shell. Our results propose that the spontaneity of the reduction reaction is driven by the entropic contribution by overcoming the penalty of the reaction enthalpy.     

Developing microencapsulated 12‐hydroxystearic acid (HSA) for phase change material use

Phase change materials (PCM) have an increasingly more important role as a thermal energy storage (TES) media. However, leakage problem of PCM causes limitation during their integration in TES systems. Therefore, the encapsulation of PCMs is attracting research interest to extend usage of PCMs in real TES applications in recent years. In this study, hydroxystearic acid (HSA) was encapsulated with polymethyl methacrylate (PMMA) and different PMMA comonomer shells via emulsion polymerization method for the first time in literature. HSA with high melting temperature range (74–78°C) can widen the scope of using PCMs, and the encapsulated form can make it more versatile. The chemical structures, morphologies, and thermophysical properties of capsules were determined by FT‐IR, SEM, DSC, TGA, and thermal infrared camera. Among the produced HSA capsule candidates, PMMA‐HEMA is the most promising with latent heat of 48.5 J/g with melting range of 47 to 85°C. SEM analysis indicated that the capsules have spherical shape with compact surface at nano‐micro (100–440 nm) size range; however, some capsules exhibited agglomeration.     

CFD modeling of thermal contact resistance between solid contacting surfaces

Heat transfer has considerable applications in different industries such as designing of heat exchanger, nuclear reactor cooling, control system for spacecraft, and designing of microelectronics cooling. As the surfaces of two metals contact each other, this issue becomes so crucial. Thermal contact resistance (TCR) is one of the key physical parameters in heat transfer of mentioned surfaces. Measuring the experimental value of TCR in laboratory is highly expensive and difficult. As an alternative, numerical modeling methods could be engaged. In this study, inverse problem method solution is utilized as a proper method for estimation of TCR value. In this order, three different configurations (flat-flat, flat-cylinder, and cylinder-cylinder) were utilized in two steady and unsteady state conditions to predict the value of TCR. A comparison between the measured values and obtained values from the simulation show the errors for flat-flat, flat-cylinder, and cylinder-cylinder configuration after 10 min from starting the experiment are 4.6074%, 0.1662%, and 0.5622%, respectively. And in steady-state condition, the corresponding errors are 6.06e-3%, 1.506%, and 0.846%, respectively. In conclusion, the final results establish the fact that the inverse problem method solution can predict TCR values between contacting surfaces.     

热轧除鳞系统节能方案

针对热轧除鳞系统普遍存在的能源浪费严重的问题,设计了基于预测模型的变频节能方案,通过板坯位置预测、除鳞时间预测、除鳞水量预测和除鳞泵转速控制,合理利用轧制间歇时间使水泵电机变频降速,模拟计算结果表明,可使除鳞电耗降低23.57%。